0769-82056828 
XB-DPL-06BLP| Product ID | Product Image | Product Description | Product Code | Production status | Shipping Cycle | Gross item weight | MPQ | MOQ | Production in transit | Competitive purchases | Operation |
XB-DPL-06BLP  3D
 Drawings |
 |
6 position Dip switch blue red black/DIP switch piano key type/dip switch 6 position dip switch/dip switch horizontal 90 degree/program switch/program switch spacing 2.54mm/code switch side inserting 90 degree | Normal | 5-7 days | 0.05kg | 1000 | 20000 | Normal | Nothing |
 Product material
|
1. Unblock switch | material |
| 2. The shell | PA66 (red, blue and black) | |
| 3. The base | PA66 (red, blue and black) | |
| 4. Terminal | Brass gold plated | |
| Use the temperature range | -40℃ to +85℃ | |
| Maximum rating (resistance load) | 0.1A 50V DC (when powered on) | |
| Minimum rating (resistance load) | 25mA 24V DC (when switched on and closed) | |
| Electroplating material for terminal contact: | Copper gilt | |
| Electric performance | withstand voltage | 500V AC |
| insulation resistance | 100MΩ min. | |
| Contact resistance (initial / post-life) | 30mΩ max. | |
| lasting quality | No load life | 3000 Times |
| load life | 3000 Times | |
| Environmental resistance | Cold resistance | -40℃ 250h |
| resistance to effect of heat | 85℃ 250h | |
| Moisture resistance | 60℃, 90 to 95%RH 250h | |
| welding condition | ||
| Reflux welding | ||
| 1. Heating mode | Up and down heating mode for far-infrared heating | |
| 2. Temperature measurement method with | The CA (K) or CC (T) measurement position of φ 0.1 φ 0.2 is fixed at the welding joint (copper foil surface) | |
| 3. Temperature distribution |
|
|
| (1) The above conditions are the temperature of the surface of the zero part of the printed circuit board. According to the circuit board material, size, thickness, etc., the temperature of the circuit board and the switch surface temperature will be very different, about the switch surface temperature, please also use in the above conditions. | ||
| (2) According to the type of veneer welding groove, different conditions and different results, please fully confirm in advance before use. | ||
| When immersed in welding | preheat temperature | Maximum temperature of 120°C |
| Preheat temperature time | Up to 90 seconds | |
| welding temperature | 270±5℃ | |
| Welding impregnation time | 10±1s max. | |
| Hand welding | welding temperature | 350±5℃ |
| Continuous welding time | Up to 5 seconds | |
Customer Service 1
Add me as a friend 
Add me as a friend 
Add me as a friend 
Add me as a friend 
Add me as a friend 
Website